Introduction to popular science about bench vise



A bench vice, also known as a vice, a bench vice. A bench vice is a general-purpose fixture used to hold workpieces. It is installed on the workbench to clamp and process the workpiece, and it is an essential tool for the fitter workshop. The turntable clamp body can be rotated to make the workpiece rotate to the appropriate working position.

A vise is an essential tool for a fitter, and it is also the reason for the name of the fitter, because most of the work of the fitter is done on the vise, such as saws, files, chisels, and the assembly and disassembly of parts. Install it on the fitter table, and take the width of the jaw as the calibration specification. Common sizes range from 75mm to 300mm. The purpose of the bench vise: It is installed on the workbench to clamp the workpiece and it is an essential tool for the fitter workshop.

The specifications of the bench vice are expressed by the width of the jaws, such as 100mm, 125mm, 150mm, etc. The bench vice is a general fixture used to hold the workpiece. There are two types of fixed and rotary types. According to the shape and function, there are two types: with an anvil and without an anvil.

Share this Post:

Pop-up Wath live
X